View TS5A2066-15_9043110.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ts5a2066 www.ti.com scds184d ? january 2005 ? revised april 2010 dual-channel 10- ? spst analog switch check for samples: ts5a2066 1 features applications ? sample-and-hold circuits 2 ? low on-state resistance (10 ? ) ? battery-powered equipment ? control inputs are 5-v tolerant ? audio and video signal routing ? low charge injection ? communication circuits ? excellent on-state resistance matching ? cell phones ? low total harmonic distortion (thd) ? low-voltage data-acquisition systems ? 1.65-v to 5.5-v single-supply operation ? pdas ? latch-up performance exceeds 100 ma per description/ordering information jesd 78, class ii the ts5a2066 is a dual single-pole single-throw ? esd performance tested per jesd 22 (spst) analog switch that is designed to operate ? 2000-v human-body model from 1.65 v to 5.5 v. this device can handle both (a114-b, class ii) digital and analog signals, and signals up to v + can be transmitted in either direction. ? 1000-v charged-device model (c101) table 1. summary of characteristics (1) dual single pole configuration single throw (2 spst) number of channels 2 on-state resistance (r on ) 7.5 ? on-state resistance match ( r on ) 0.4 ? on-state resistance flatness (r on(flat) ) 3.5 ? turn-on/turn-off time (t on /t off ) 5.8 ns/3.6 ns charge injection (q c ) 1 pc bandwidth (bw) 400 mhz off isolation (o iso ) ? 68 db crosstalk (x talk ) ? 66 db total harmonic distortion (thd) 0.01% leakage current (i com(off) /(i nc(off) 50 na power-supply current (i + ) 0.1 m a 8-pin dsbga, ssop, package options or vssop (1) v + = 5 v and t a = 25 c 1 please be aware that an important notice concerning availability, standard warranty, and use in critical applications of texas instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. 2 nanofree is a trademark of texas instruments. production data information is current as of publication date. copyright ? 2005 ? 2010, texas instruments incorporated products conform to specifications per the terms of the texas instruments standard warranty. production processing does not necessarily include testing of all parameters. dct or dcu package (top view) 1 23 4 8 76 5 no1 com1 in2 gnd com2 in1 v + no2 yzp package (bottom view) gnd in2 com1 no1 in1 com2 no2v + 4 3 2 1 8 67 5 d2 d1 c2 c1 b2 b1 a2 a1
ts5a2066 scds184d ? january 2005 ? revised april 2010 www.ti.com ordering information (1) orderable t a package (2) top-side marking (3) part number nanofree ? ? wcsp (dsbga) reel of 3000 ts5a2066yzpr _ _ _j4_ 0.23-mm large bump ? yzp (pb-free) ? 40 c to 85 c ssop ? dct reel of 3000 ts5a2066dctr jag_ _ _ vssop ? dcu reel of 3000 ts5a2066dcur jag_ (1) for the most current package and ordering information, see the package option addendum at the end of this document, or see the ti web site at www.ti.com . (2) package drawings, thermal data, and symbolization are available at www.ti.com/packaging . (3) dct: the actual top-side marking has three additional characters that designate the year, month, and wafer fab/assembly site. dcu: the actual top-side marking has one additional character that designates the wafer fab/assembly site. yzp: the actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following character to designate the wafer fab/assembly site. pin 1 identifier indicates solder-bump composition (1 = snpb, = pb-free). function table no to com, in com to no l off h on absolute minimum and maximum ratings (1) (2) over operating free-air temperature range (unless otherwise noted) min max unit v + supply voltage range (3) ? 0.5 6.5 v v no analog voltage range (3) (4) (5) ? 0.5 v + + 0.5 v v com i k analog port diode current v no , v com < 0 or v no , v com > v + ? 50 50 ma i no on-state switch current v no , v com = 0 to v + ? 50 50 ma i com v i digital input voltage range (3) (4) ? 0.5 6.5 v i ik digital input clamp current v i < 0 ? 50 ma i + continuous current through v + 100 ma i gnd continuous current through gnd ? 100 100 ma dct package 220 q ja package thermal impedance (6) dcu package 227 c/w yzp package 102 t stg storage temperature range ? 65 150 c (1) stresses beyond those listed under " absolute maximum ratings " may cause permanent damage to the device. these are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under " recommended operating conditions " is not implied. exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) the algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum (3) all voltages are with respect to ground, unless otherwise specified. (4) the input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. (5) this value is limited to 5.5 v maximum. (6) the package thermal impedance is calculated in accordance with jesd 51-7. 2 submit documentation feedback copyright ? 2005 ? 2010, texas instruments incorporated product folder link(s): ts5a2066
ts5a2066 www.ti.com scds184d ? january 2005 ? revised april 2010 electrical characteristics for 5-v supply (1) v + = 4.5 v to 5.5 v, t a = ? 40 c to 85 c (unless otherwise noted) parameter symbol test conditions t a v + min typ max unit analog switch analog signal v com , v no 0 v + v range 0 v no v + , 25 c 7.5 10 on-state switch on, r on 4.5 v ? i com = ? 32 ma, resistance see figure 13 full 15 on-state 25 c 0.4 1 resistance v no = 3.15 v, switch on, match r on 4.5 v ? i com = ? 32 ma, see figure 13 full 3 between channels on-state 25 c 2 3.5 5 0 v no v + , switch on, resistance r on(flat) 4.5 v ? i com = ? 32 ma, see figure 13 full 4 8 flatness v no = 1 v, 25 c ? 30 ? 10 30 no v com = 4.5 v, switch off, off leakage i no(off) or 5.5 v na see figure 14 full ? 40 40 current v no = 4.5 v, v com = 1 v, v com = 1 v, 25 c ? 50 ? 8 50 com v no = 4.5 v, switch off, off leakage i com(off) or 5.5 v na see figure 14 full ? 50 50 current v com = 4.5 v, v no = 1 v, v no = 1 v, 25 c ? 40 ? 12 40 no v com = open, switch on, on leakage i no(on) or 5.5 v na see figure 15 full ? 4 40 current v no = 4.5 v, v com = open v com = 1 v, 25 c ? 70 ? 30 70 com v no = open, switch on, on leakage i com(on) or 5.5 v na see figure 15 full ? 70 70 current v com = 4.5 v, v no = open, digital control input (in) v ih full v + 5.5 input logic high v 0.7 v il full 0 v + input logic low v 0.3 25 c ? 0.1 0.05 0.1 input leakage i ih , i il v i = 5.5 v or 0 5.5 v m a current full ? 1 1 (1) the algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum copyright ? 2005 ? 2010, texas instruments incorporated submit documentation feedback 3 product folder link(s): ts5a2066
ts5a2066 scds184d ? january 2005 ? revised april 2010 www.ti.com electrical characteristics for 5-v supply (1) (continued) v + = 4.5 v to 5.5 v, t a = ? 40 c to 85 c (unless otherwise noted) parameter symbol test conditions t a v + min typ max unit dynamic 25 c 5 v 4.4 5.2 5.8 v com = 3 v, c l = 35 pf, turn-on time t on ns 4.5 v to r l = 300 ? , see figure 17 full 3.4 6.1 5.5 v 25 c 5 v 1.7 2.6 3.6 v com = 3 v, c l = 35 pf, turn-off time t off ns 4.5 v to r l = 300 ? , see figure 17 full 1.3 4.2 5.5 v v gen = 0, c l = 0.1 nf, charge injection q c 25 c 5 v 1 pc r gen = 0, see figure 21 no v no = v + or gnd, c no(off) see figure 16 25 c 5 v 5.5 pf off capacitance switch off, com v com = v + or gnd, c com(off) see figure 16 25 c 5 v 5.5 pf off capacitance switch off, no v no = v + or gnd, c no(on) see figure 16 25 c 5 v 13.5 pf on capacitance switch on, com v com = v + or gnd, c com(on) see figure 16 25 c 5 v 13.5 pf on capacitance switch on, digital input c i v i = v + or gnd, see figure 16 25 c 5 v 2.5 pf capacitance r l = 50 ? , bandwidth bw see figure 18 25 c 5 v 300 mhz switch on, r l = 50 ? , switch off, off isolation o iso 25 c 5 v ? 68 db f = 10 mhz, see figure 19 r l = 50 ? , switch on, crosstalk x talk 25 c 5 v ? 66 db f = 10 mhz, see figure 20 total harmonic r l = 600 ? , f = 20 hz to 20 khz, thd 25 c 5 v 0.01 % distortion c l = 50 pf, see figure 22 supply 25 c 0.1 1 positive supply i + v i = v + or gnd, switch on or off 5.5 v m a current full 5 4 submit documentation feedback copyright ? 2005 ? 2010, texas instruments incorporated product folder link(s): ts5a2066
ts5a2066 www.ti.com scds184d ? january 2005 ? revised april 2010 electrical characteristics for 3.3-v supply (1) v + = 3 v to 3.6 v, t a = ? 40 c to 85 c (unless otherwise noted) parameter symbol test conditions t a v + min typ max unit analog switch analog signal v com , v no 0 v + v range 0 v no v + , 25 c 10 12 15 on-state switch on, r on 3 v ? i com = ? 24 ma, resistance see figure 13 full 12 20 on-state 25 c 0.04 0.5 1.5 resistance match v no = 2.1 v, switch on, r on 3 v ? between i com = ? 24 ma, see figure 13 full 0.01 3.5 channels on-state 25 c 6 7 8 0 v no v + , switch on, resistance r on(flat) 3 v ? i com = ? 24 ma, see figure 13 full 9 12 flatness v no = 1 v, 25 c ? 30 ? 6 30 no v com = 3 v, switch off, off leakage i no(off) or 3.6 v na see figure 14 full ? 40 40 current v no = 3 v, v com = 1 v, v com = 1 v, 25 c ? 50 ? 7 50 com v no = 3 v, switch off, off leakage i com(off) or 3.6 v na see figure 14 full ? 50 50 current v com = 3 v, v no = 1 v, v no = 1 v, 25 c ? 40 ? 7 40 no v com = open, switch on, on leakage i no(on) or 3.6 v na see figure 15 full ? 40 40 current v no = 3 v, v com = open, v com = 1 v, 25 c ? 70 ? 20 70 com v no = open, switch on, on leakage i com(on) or 3.6 v na see figure 15 full ? 70 70 current v com = 3 v, v no = open, digital control input (in) input logic high v ih full v + 0.7 5.5 v input logic low v il full 0 v + 0.3 v 25 c ? 0.1 0.05 0.1 input leakage i ih , i il v i = 5.5 v or 0 3.6 v m a current full ? 1 1 (1) the algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum copyright ? 2005 ? 2010, texas instruments incorporated submit documentation feedback 5 product folder link(s): ts5a2066
ts5a2066 scds184d ? january 2005 ? revised april 2010 www.ti.com electrical characteristics for 3.3-v supply (1) (continued) v + = 3 v to 3.6 v, t a = ? 40 c to 85 c (unless otherwise noted) parameter symbol test conditions t a v + min typ max unit dynamic 25 c 3.3 v 4.9 5.6 6.4 v com = 2 v, c l = 35 pf, turn-on time t on ns 3 v to r l = 300 ? , see figure 17 full 4.3 7.1 3.6 v 25 c 3.3 v 2 2.7 3.7 v com = 2 v, c l = 35 pf, turn-off time t off ns 3 v to r l = 300 ? , see figure 17 full 1.3 4.7 3.6 v v gen = 0, c l = 0.1 nf, charge injection q c 25 c 3.3 v 0.5 pc r gen = 0, see figure 21 no v no = v + or gnd, c no(off) see figure 16 25 c 3.3 v 5.5 pf off capacitance switch off, com v com = v + or gnd, c com(off) see figure 16 25 c 3.3 v 6 pf off capacitance switch off, no v no = v + or gnd, c no(on) see figure 16 25 c 3.3 v 14 pf on capacitance switch on, com v com = v + or gnd, c com(on) see figure 16 25 c 3.3 v 14 pf on capacitance switch on, digital input c i v i = v + or gnd, see figure 16 25 c 3.3 v 3 pf capacitance r l = 50 ? , bandwidth bw see figure 18 25 c 3.3 v 300 mhz switch on, r l = 50 ? , switch off, off isolation o iso 25 c 3.3 v ? 68 db f = 10 mhz, see figure 19 r l = 50 ? , switch on, crosstalk x talk 25 c 3.3 v ? 66 db f = 10 mhz, see figure 20 total harmonic r l = 600 ? , f = 20 hz to 20 khz, thd 25 c 3.3 v 0.065 % distortion c l = 50 pf, see figure 22 supply . 25 c 0.1 1 positive supply i + v i = v + or gnd, switch on or off 3.6 v m a current full 5 6 submit documentation feedback copyright ? 2005 ? 2010, texas instruments incorporated product folder link(s): ts5a2066
ts5a2066 www.ti.com scds184d ? january 2005 ? revised april 2010 electrical characteristics for 2.5-v supply (1) v + = 2.3 v to 2.7 v, t a = ? 40 c to 85 c (unless otherwise noted) parameter symbol test conditions t a v + min typ max unit analog switch analog signal v com , v no 0 v + v range 0 v no v + , 25 c 20 22 on-state switch on, r on 2.3 v ? i com = ? 8 ma, resistance see figure 13 full 30 on-state 25 c 0.04 0.5 1.5 resistance match v no = 1.6 v, switch on, r on 2.3 v ? between i com = ? 8 ma, see figure 13 full 0.02 5 channels on-state 25 c 12 16 18 0 v no v + , switch on, resistance r on(flat) 2.3 v ? i com = ? 8 ma, see figure 13 full 15 25 flatness v no = 0.5 v, 25 c ? 30 ? 5.5 30 no v com = 2.2 v, switch off, off leakage i no(off) or 2.7 v na see figure 14 full ? 40 40 current v no = 2.2 v, v com = 0.5 v, v com = 0.5 v, 25 c ? 50 ? 7.5 50 com v no = 2.2 v, switch off, off leakage i com(off) or 2.7 v na see figure 14 full ? 50 50 current v com = 2.2 v, v no = 0.5 v, v no = 0.5 v, 25 c ? 40 ? 5 40 no v com = open, switch on, on leakage i no(on) or 2.7 v na see figure 15 full ? 40 40 current v no = 2.2 v, v com = open, v com = 0.5 v, 25 c ? 70 ? 12 70 com v no = open, switch on, on leakage i com(on) or 2.7 v na see figure 15 full ? 70 70 current v com = 2.2 v, v no = open, digital control input (in) input logic high v ih full v + 0.7 5.5 v input logic low v il full 0 v + 0.3 v 25 c ? 0.1 0.05 0.1 input leakage i ih , i il v i = 5.5 v or 0 2.7 v m a current full ? 1 1 (1) the algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum copyright ? 2005 ? 2010, texas instruments incorporated submit documentation feedback 7 product folder link(s): ts5a2066
ts5a2066 scds184d ? january 2005 ? revised april 2010 www.ti.com electrical characteristics for 2.5-v supply (1) (continued) v + = 2.3 v to 2.7 v, t a = ? 40 c to 85 c (unless otherwise noted) parameter symbol test conditions t a v + min typ max unit dynamic 25 c 2.5 v 5.7 6.4 8.1 v com = 1.5 v, c l = 35 pf, turn-on time t on ns 2.3 v to r l = 300 ? , see figure 17 full 4.4 8.5 2.7 v 25 c 2.5 v 2.1 3.1 4.3 v com = 1.5 v, c l = 35 pf, turn-off time t off ns 2.3 v to r l = 300 ? , see figure 17 full 1.8 4.8 2.7 v v gen = 0, c l = 0.1 nf, charge injection q c 25 c 2.5 v 0.5 pc r gen = 0, see figure 20 no v no = v + or gnd, c no(off) see figure 16 25 c 2.5 v 6 pf off capacitance switch off, com v com = v + or gnd, c com(off) see figure 16 25 c 2.5 v 6 pf off capacitance switch off, no v no = v + or gnd, c no(on) see figure 16 25 c 2.5 v 14 pf on capacitance switch on, com v com = v + or gnd, c com(on) see figure 16 25 c 2.5 v 14 pf on capacitance switch on, digital input c i v i = v + or gnd, see figure 16 25 c 2.5 v 3 pf capacitance r l = 50 ? , bandwidth bw see figure 18 25 c 2.5 v 300 mhz switch on, r l = 50 ? , switch off, off isolation o iso 25 c 2.5 v ? 68 db f = 10 mhz, see figure 19 r l = 50 ? , switch on, crosstalk x talk 25 c 2.5 v ? 66 db f = 10 mhz, see figure 20 total harmonic r l = 600 ? , f = 20 hz to 20 khz, thd 25 c 2.5 v 0.35 % distortion c l = 50 pf, see figure 22 supply 25 c 0.1 1 positive supply i + v i = v + or gnd, switch on or off 2.7 v m a current full 5 8 submit documentation feedback copyright ? 2005 ? 2010, texas instruments incorporated product folder link(s): ts5a2066
ts5a2066 www.ti.com scds184d ? january 2005 ? revised april 2010 electrical characteristics for 1.8-v supply (1) v + = 1.65 v to 1.95 v, t a = ? 40 c to 85 c (unless otherwise noted) parameter symbol test conditions t a v + min typ max unit analog switch analog signal v com , v no 0 v + v range 0 v no v + , 25 c 80 85 on-state switch on, r on 1.65 v ? i com = ? 4 ma, resistance see figure 13 full 90 120 on-state 25 c 0 0.9 2 resistance v no = 1.15 v, switch on, match r on 1.65 v ? i com = ? 4 ma, see figure 13 full 0 6 between channels on-state 25 c 70 75 85 0 v no v + , switch on, resistance r on(flat) 1.65 v ? i com = ? 4 ma, see figure 13 full 85 100 flatness v no = 0.3 v, 25 c ? 30 ? 6 30 no v com = 1.65 v, switch off, off leakage i no(off) or 1.95 v na see figure 14 full ? 40 40 current v no = 1.65 v, v com = 0.3 v, v com = 0.3 v, 25 c ? 50 ? 7 50 com v no = 1.65 v, switch off, off leakage i com(off) or 1.95 v na see figure 14 full ? 50 50 current v com = 1.65 v, v no = 0.3 v, v no = 0.3 v, 25 c ? 40 7 40 no v com = open, switch on, on leakage i no(on) or 1.95 v na see figure 15 full ? 40 40 current v no = 1.65 v, v com = open, v com = 0.3 v, 25 c ? 70 ? 8.5 70 com v no = open, switch on, on leakage i com(on) or 1.95 v na see figure 15 full ? 70 70 current v com = 1.65 v, v no = open, digital control input (in) input logic high v ih full v + 0.65 5.5 v input logic low v il full 0 v + 0.35 v 25 c ? 0.1 0.05 0.1 input leakage i ih , i il v i = 5.5 v or 0 1.95 v m a current full ? 1 1 (1) the algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum copyright ? 2005 ? 2010, texas instruments incorporated submit documentation feedback 9 product folder link(s): ts5a2066
ts5a2066 scds184d ? january 2005 ? revised april 2010 www.ti.com electrical characteristics for 1.8-v supply (1) (continued) v + = 1.65 v to 1.95 v, t a = ? 40 c to 85 c (unless otherwise noted) parameter symbol test conditions t a v + min typ max unit dynamic 25 c 1.8 v 9.3 10.4 11.5 v com = 1.3 v, c l = 35 pf, 1.65 v turn-on time t on ns r l = 300 ? , see figure 17 full to 6.8 12.9 1.95 v 25 c 1.8 v 3.3 4.3 5.2 v com = 1.3 v, c l = 35 pf, 1.65 v turn-off time t off ns r l = 300 ? , see figure 17 full to 2.4 6.5 1.95 v v gen = 0, c l = 0.1 nf, charge injection q c 25 c 1.8 v 0.5 pc r gen = 0, see figure 21 no v no = v + or gnd, off c no(off) see figure 16 25 c 1.8 v 6 pf switch off, capacitance com v com = v + or off c com(off) gnd, see figure 16 25 c 1.8 v 6 pf switch off, capacitance no v no = v + or gnd, c no(on) see figure 16 25 c 1.8 v 14.5 pf on capacitance switch on, v com = v + or com c com(on) gnd, see figure 16 25 c 1.8 v 14.5 pf on capacitance switch on, digital input c i v i = v + or gnd, see figure 16 25 c 1.8 v 3 pf capacitance r l = 50 ? , bandwidth bw see figure 18 25 c 1.8 v 293 mhz switch on, r l = 50 ? , switch off, off isolation o iso 25 c 1.8 v ? 68 db f = 10 mhz, see figure 19 r l = 50 ? , switch on, crosstalk x talk 25 c 1.8 v ? 66 db f = 10 mhz, see figure 20 total harmonic r l = 10 k ? , f = 20 hz to 20 khz, thd 25 c 1.8 v 2.7 % distortion c l = 50 pf, see figure 22 supply 25 c 0.1 1 positive supply i + v i = v + or gnd, switch on or off 1.95 v m a current full 5 10 submit documentation feedback copyright ? 2005 ? 2010, texas instruments incorporated product folder link(s): ts5a2066
ts5a2066 www.ti.com scds184d ? january 2005 ? revised april 2010 typical performance figure 1. r on vs v com figure 2. r on vs v com (v + = 3 v) copyright ? 2005 ? 2010, texas instruments incorporated submit documentation feedback 11 product folder link(s): ts5a2066 figure 1 0 10 20 30 40 50 60 70 80 90 v com (v) r on w t a = 25 c no1 com1 0 0.25 0.5 1 1.25 1.5 1.75 0.75 0 5 10 15 20 25 v com (v) r on t a = 25 c no1 com1 0 0.3 0.6 1.2 1.5 1.8 2.1 0.9 2.4 0 2 4 6 8 10 12 14 v com (v) r on ( ) t a = 25 c no1 com1 0 0.5 1 2 2.5 3 1.5 0 1 2 3 4 5 6 7 8 9 10 v com (v) r on ( ) t a = 25 c no1 com1 0 0.5 1 2 2.5 3 1.5 3.5 4 4.5 v + = 1.65 v v + = 2.3 v v + = 3 v v + = 4.5 v 0 2 4 6 8 10 12 14 16 v com (v) r on ( ) t a = ?40 c t a = 25 c t a = 85 c 0 0.5 1 2 2.5 3 1.5
ts5a2066 scds184d ? january 2005 ? revised april 2010 www.ti.com typical performance (continued) figure 3. r on vs v com (v + = 4.5 v) figure 4. leakage current vs temperature figure 5. charge injection (q c ) vs v com 12 submit documentation feedback copyright ? 2005 ? 2010, texas instruments incorporated product folder link(s): ts5a2066 0 1 2 3 4 5 6 7 8 9 10 v com (v) r on ( ) t a = ?40 c t a = 25 c t a = 85 c 0 0.5 1 2 2.5 3 1.5 3.5 4 4.5 0 2 4 6 8 10 12 14 16 18 20 ?40 c 25 c 85 c leakage (na) t a ( c) i no2(off) i no2(on) i com2(on), i com2(off) i no1(on) i com1(on), i com1(off) i no1(off) 3.3 v 5 v ?1.0 ?0.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 1 2 3 4 5 6 v com q c
ts5a2066 www.ti.com scds184d ? january 2005 ? revised april 2010 typical performance (continued) figure 6. t on and t off vs v + figure 7. t on and t off vs temperature (v + = 5 v) figure 8. logic threshold vs v + copyright ? 2005 ? 2010, texas instruments incorporated submit documentation feedback 13 product folder link(s): ts5a2066 0 2 4 6 8 10 12 1.65 2.15 2.65 3.15 3.65 4.15 4.65 5.15 supply v oltage (v) t on t on /t off (ns) t off 0 1 2 3 4 5 6 t a ( c) t on /t off (ns) ?40 c 25 c 85 c t on t off v + (v) logic threshold (v) v il v ih t a = 25 c 0.5 1 1.5 2 2.5 3 3.5 0 1.6 2.1 2.6 3.1 3.6 4.1 4.6 5.1 5.6
ts5a2066 scds184d ? january 2005 ? revised april 2010 www.ti.com typical performance (continued) figure 9. bandwidth (v + = 5 v) figure 10. off isolation and crosstalk (v + = 5 v) figure 11. total harmonic distortion vs frequency 14 submit documentation feedback copyright ? 2005 ? 2010, texas instruments incorporated product folder link(s): ts5a2066 C35 C30 C25 C20 C15 C10 C5 0 5 C10 C8 C6 C4 C2 ?1 0 0.1 1 10 100 1000 frequency (mhz) gain (db) phase () phase gain t a = 25c frequency (mhz) gain (db) C120 C100 C60 C40 C20 0 0.1 1 10 100 1000 C80 off isolation crosstalk 0 1 2 3 4 5 6 0.1 1 10 100 1000 frequency (mhz) thd + noise (%) 7 thd (3.3 v) thd (5 v)
ts5a2066 www.ti.com scds184d ? january 2005 ? revised april 2010 typical performance (continued) figure 12. power-supply current vs temperature (v + = 5 v) copyright ? 2005 ? 2010, texas instruments incorporated submit documentation feedback 15 product folder link(s): ts5a2066 0 10 20 30 40 50 60 70 ?40 c 25 c 85 c i cc typ (na) t a ( c)
ts5a2066 scds184d ? january 2005 ? revised april 2010 www.ti.com table 2. pin description no. name description 1 no1 normally open 2 com1 common 3 in2 digital control to connect com to no 4 gnd digital ground 5 no2 normally open 6 com2 common 7 in1 digital control to connect com to no 8 v + power supply table 3. parameter description symbol description v com voltage at com v no voltage at no r on resistance between com and no ports when the channel is on r on difference of r on between channels in a specific device r on(flat) difference between the maximum and minimum value of r on in a channel over the specified range of conditions i no(off) leakage current measured at the no port, with the corresponding channel (no to com) in the off state leakage current measured at the no port, with the corresponding channel (no to com) in the on state and the output i no(on) (com) open i com(off) leakage current measured at the com port, with the corresponding channel (com to no) in the off state leakage current measured at the com port, with the corresponding channel (com to no) in the on state and the output i com(on) (no) open v ih minimum input voltage for logic high for the control input (in) v il maximum input voltage for logic low for the control input (in) v i voltage at the control input (in) i ih , i il leakage current measured at the control input (in) turn-on time for the switch. this parameter is measured under the specified range of conditions and by the propagation t on delay between the digital control (in) signal and analog output (com or no) signal when the switch is turning on. turn-off time for the switch. this parameter is measured under the specified range of conditions and by the propagation t off delay between the digital control (in) signal and analog output (com or no) signal when the switch is turning off. charge injection is a measurement of unwanted signal coupling from the control (in) input to the analog (no or com) q c output. this is measured in coulomb (c) and measured by the total charge induced due to switching of the control input.charge injection, q c = c l v com , c l is the load capacitance and v com is the change in analog output voltage. c no(off) capacitance at the no port when the corresponding channel (no to com) is off c no(on) capacitance at the no port when the corresponding channel (no to com) is on c com(off) capacitance at the com port when the corresponding channel (com to no) is off c com(on) capacitance at the com port when the corresponding channel (com to no) is on c i capacitance of in off isolation of the switch is a measurement of off-state switch impedance. this is measured in db in a specific o iso frequency, with the corresponding channel (no to com) in the off state. crosstalk is a measurement of unwanted signal coupling from an on channel to an adjacent on channel (nc1 to nc2). x talk this is measured in a specific frequency and in db. bw bandwidth of the switch. this is the frequency in which the gain of an on channel is ? 3 db below the dc gain. total harmonic distortion is defined as the ratio of the root mean square (rms) value of the second, third, and higher thd harmonics to the magnitude of fundamental harmonic. i + static power-supply current with the control (in) pin at v + or gnd 16 submit documentation feedback copyright ? 2005 ? 2010, texas instruments incorporated product folder link(s): ts5a2066
ts5a2066 www.ti.com scds184d ? january 2005 ? revised april 2010 parameter measurement information figure 13. on-state resistance (r on ) figure 14. off-state leakage current (i com(off) , i no(off) ) figure 15. on-state leakage current (i com(on) , i no(on) ) copyright ? 2005 ? 2010, texas instruments incorporated submit documentation feedback 17 product folder link(s): ts5a2066 v + i com r on v com v no i com gnd channel on no v i com v com v i = v ih or v il v no in + + channel off off-state leakage current v i = v ih or v il v + gnd no v i com v com v no in + + + channel on on-state leakage current v i = v ih or v il v + gnd no v i com v com v no in + +
ts5a2066 scds184d ? january 2005 ? revised april 2010 www.ti.com parameter measurement information (continued) figure 16. capacitance (c i , c com(off) , c com(on) , c no(off) , c no(on) ) (1) all input pulses are supplied by generators having the following characteristics: prr 10 mhz, z o = 50 ? , t r < 5 ns, t f < 5 ns. (2) c l includes probe and jig capacitance. (3) see electrical characteristics for v com . figure 17. turn-on (t on ) and turn-off time (t off ) 18 submit documentation feedback copyright ? 2005 ? 2010, texas instruments incorporated product folder link(s): ts5a2066 v + gnd in v bias v i v i = v ih or v il v bias = v + or gnd capacitance is measured at no,com, and in inputs during on and off conditions. capacitance meter v com v no com no c l (2) r l v com v + gnd no in v no v i com logic input (1) 300 w r l c l 35 pf t on test 300 w 35 pf t off 50% t on t off 50% 90% 90% logic input (v i ) v + switch output (v no ) 0 (3)
ts5a2066 www.ti.com scds184d ? january 2005 ? revised april 2010 parameter measurement information (continued) figure 18. bandwidth (bw) figure 19. off isolation (o iso ) figure 20. crosstalk (x talk ) (4) all input pulses are supplied by generators having the following characteristics: prr 10 mhz, z o = 50 ? , t r < 5 ns, t f < 5 ns. (5) c l includes probe and jig capacitance. copyright ? 2005 ? 2010, texas instruments incorporated submit documentation feedback 19 product folder link(s): ts5a2066 v + gnd no in v i com 50 50 v no v com channel on: no to com network analyzer setup source power = 0 dbm(632-mv p-p at 50- load) dc bias = 350 mv network analyzer source signal + v i = v + or gnd no com v no v com channel off: no to com network analyzer setup source power = 0 dbm(632-mv p-p at 50- load) dc bias = 350 mv 50 v + gnd 50 50 network analyzer source signal in v i + v i = v + or gnd no1 no2 50 50 v no1 com1 channel on: no to com network analyzer setup source power = 0 dbm(632 mv p-p at 50 load) dc bias = 350 mv 50 v + gnd v no2 sourcesignal network analyzer com2 in v i +
ts5a2066 scds184d ? january 2005 ? revised april 2010 www.ti.com parameter measurement information (continued) figure 21. charge injection (q c ) (6) c l includes probe and jig capacitance. figure 22. total harmonic distortion (thd) 20 submit documentation feedback copyright ? 2005 ? 2010, texas instruments incorporated product folder link(s): ts5a2066 v + gnd no in r gen v i com v com c l (2) off v com on off d v com v gen + v i = v ih or v il c l = 0.1 nf v gen = 0 to v + r gen = 0 q c = c l d v com logic input (1) v ih v il logic input (v i) v + gnd no com 10 f c l (1) r l v + /2 10 f in v i 600 600 600 audio analyzer source signal r l = 600 w c l = 50 pf v source = v + p-p f source = 20 hz to 20 khz channel on: com to nc v i = v ih or v il
package option addendum www.ti.com 17-aug-2015 addendum-page 1 packaging information orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish (6) msl peak temp (3) op temp (c) device marking (4/5) samples ts5a2066dctr active sm8 dct 8 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 jag z ts5a2066dctre4 active sm8 dct 8 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 jag z ts5a2066dcur active vssop dcu 8 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 jagr ts5a2066dcure4 active vssop dcu 8 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 jagr ts5a2066dcurg4 active vssop dcu 8 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 jagr ts5a2066yzpr active dsbga yzp 8 3000 green (rohs & no sb/br) snagcu level-1-260c-unlim -40 to 85 (j47 ~ j4n) (1) the marketing status values are defined as follows: active: product device recommended for new designs. lifebuy: ti has announced that the device will be discontinued, and a lifetime-buy period is in effect. nrnd: not recommended for new designs. device is in production to support existing customers, but ti does not recommend using this part in a new design. preview: device has been announced but is not in production. samples may or may not be available. obsolete: ti has discontinued the production of the device. (2) eco plan - the planned eco-friendly classification: pb-free (rohs), pb-free (rohs exempt), or green (rohs & no sb/br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. tbd: the pb-free/green conversion plan has not been defined. pb-free (rohs): ti's terms "lead-free" or "pb-free" mean semiconductor products that are compatible with the current rohs requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. where designed to be soldered at high temperatures, ti pb-free products are suitable for use in specified lead-free processes. pb-free (rohs exempt): this component has a rohs exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. the component is otherwise considered pb-free (rohs compatible) as defined above. green (rohs & no sb/br): ti defines "green" to mean pb-free (rohs compatible), and free of bromine (br) and antimony (sb) based flame retardants (br or sb do not exceed 0.1% by weight in homogeneous material) (3) msl, peak temp. - the moisture sensitivity level rating according to the jedec industry standard classifications, and peak solder temperature. (4) there may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) multiple device markings will be inside parentheses. only one device marking contained in parentheses and separated by a "~" will appear on a device. if a line is indented then it is a continuation of the previous line and the two combined represent the entire device marking for that device.
package option addendum www.ti.com 17-aug-2015 addendum-page 2 (6) lead/ball finish - orderable devices may have multiple material finish options. finish options are separated by a vertical ruled line. lead/ball finish values may wrap to two lines if the finish value exceeds the maximum column width. important information and disclaimer: the information provided on this page represents ti's knowledge and belief as of the date that it is provided. ti bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. efforts are underway to better integrate information from third parties. ti has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. ti and ti suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. in no event shall ti's liability arising out of such information exceed the total purchase price of the ti part(s) at issue in this document sold by ti to customer on an annual basis.
tape and reel information *all dimensions are nominal device package type package drawing pins spq reel diameter (mm) reel width w1 (mm) a0 (mm) b0 (mm) k0 (mm) p1 (mm) w (mm) pin1 quadrant ts5a2066dcur vssop dcu 8 3000 180.0 8.4 2.25 3.35 1.05 4.0 8.0 q3 ts5a2066dcurg4 vssop dcu 8 3000 180.0 8.4 2.25 3.35 1.05 4.0 8.0 q3 ts5a2066yzpr dsbga yzp 8 3000 178.0 9.2 1.02 2.02 0.63 4.0 8.0 q1 package materials information www.ti.com 19-aug-2015 pack materials-page 1
*all dimensions are nominal device package type package drawing pins spq length (mm) width (mm) height (mm) ts5a2066dcur vssop dcu 8 3000 202.0 201.0 28.0 ts5a2066dcurg4 vssop dcu 8 3000 202.0 201.0 28.0 ts5a2066yzpr dsbga yzp 8 3000 220.0 220.0 35.0 package materials information www.ti.com 19-aug-2015 pack materials-page 2
mechanical data mpds049b ? may 1999 ? revised october 2002 post office box 655303 ? dallas, texas 75265 dct (r-pdso-g8) plastic small-outline package ????? ????? ????? ????? 0,60 0,20 0,25 0 ? 8 0,15 nom gage plane 4188781/c 09/02 4,25 5 0,30 0,15 2,90 3,75 2,70 8 4 3,15 2,75 1 0,10 0,00 1,30 max seating plane 0,10 m 0,13 0,65 pin 1 index area notes: a. all linear dimensions are in millimeters. b. this drawing is subject to change without notice. c. body dimensions do not include mold flash or protrusion d. falls within jedec mo-187 variation da.

d: max = e: max = 1.918 mm, min = 0.918 mm, min = 1.858 mm0.858 mm
important notice texas instruments incorporated and its subsidiaries (ti) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per jesd46, latest issue, and to discontinue any product or service per jesd48, latest issue. buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. all semiconductor products (also referred to herein as ? components ? ) are sold subject to ti ? s terms and conditions of sale supplied at the time of order acknowledgment. ti warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in ti ? s terms and conditions of sale of semiconductor products. testing and other quality control techniques are used to the extent ti deems necessary to support this warranty. except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. ti assumes no liability for applications assistance or the design of buyers ? products. buyers are responsible for their products and applications using ti components. to minimize the risks associated with buyers ? products and applications, buyers should provide adequate design and operating safeguards. ti does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which ti components or services are used. information published by ti regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from ti under the patents or other intellectual property of ti. reproduction of significant portions of ti information in ti data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. ti is not responsible or liable for such altered documentation. information of third parties may be subject to additional restrictions. resale of ti components or services with statements different from or beyond the parameters stated by ti for that component or service voids all express and any implied warranties for the associated ti component or service and is an unfair and deceptive business practice. ti is not responsible or liable for any such statements. buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of ti components in its applications, notwithstanding any applications-related information or support that may be provided by ti. buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. buyer will fully indemnify ti and its representatives against any damages arising out of the use of any ti components in safety-critical applications. in some cases, ti components may be promoted specifically to facilitate safety-related applications. with such components, ti ? s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. nonetheless, such components are subject to these terms. no ti components are authorized for use in fda class iii (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. only those ti components which ti has specifically designated as military grade or ? enhanced plastic ? are designed and intended for use in military/aerospace applications or environments. buyer acknowledges and agrees that any military or aerospace use of ti components which have not been so designated is solely at the buyer ' s risk, and that buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. ti has specifically designated certain components as meeting iso/ts16949 requirements, mainly for automotive use. in any case of use of non-designated products, ti will not be responsible for any failure to meet iso/ts16949. products applications audio www.ti.com/audio automotive and transportation www.ti.com/automotive amplifiers amplifier.ti.com communications and telecom www.ti.com/communications data converters dataconverter.ti.com computers and peripherals www.ti.com/computers dlp ? products www.dlp.com consumer electronics www.ti.com/consumer-apps dsp dsp.ti.com energy and lighting www.ti.com/energy clocks and timers www.ti.com/clocks industrial www.ti.com/industrial interface interface.ti.com medical www.ti.com/medical logic logic.ti.com security www.ti.com/security power mgmt power.ti.com space, avionics and defense www.ti.com/space-avionics-defense microcontrollers microcontroller.ti.com video and imaging www.ti.com/video rfid www.ti-rfid.com omap applications processors www.ti.com/omap ti e2e community e2e.ti.com wireless connectivity www.ti.com/wirelessconnectivity mailing address: texas instruments, post office box 655303, dallas, texas 75265 copyright ? 2015, texas instruments incorporated

▲Up To Search▲

Price & Availability of TS5A2066-15

	To Download TS5A2066-15 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .